110V 4500psi Air Compressor for Scuba Tank/PCP Rife/Paintball Air Gun Filling

Description

Product Description
110V 4500psi Air Compressor for Scuba Tank/PCP Rife/Paintball Air Gun Filling
4 service centers in USA
MD / 815 Central Ave. Ste. F-G Linthicum Heights, MD 21090
CA / 1001 N Todd Ave, Azusa CA 91702
IL / 5000 W. Roosevelt, Back of the building, dock 24-33，Chicago, IL 60644
TX / 1336 W Carrier Pkwy, Grand Prairie, TX 75050
For PICK UP ADDRESS(If you want pick up,please buy it first then contact us):
【WEST（CA）】
1001 N Todd Ave, Azusa Ca 91702
【 EAST（MD）】
815 Central Ave. Ste. F-G Linthicum Heights, MD 21090
【 SC】
1980 Technology Drive, Charleston, SC 29492
【 TX（Dallas）】
917 Parkway Dr，Grand Prairie, TX 75051
【 Vancouver, Canada】
110-6391 Westminster Hwy, Richmond BC V7C4V4
【 Toronto, Canada】
6175 Kenway Dr, Mississauga Ontario, L5T2L3
- Charging rate: 60L/min; 2.0-3.0cfm
- Filling Time: About 10 minutes to full filling of 1 liter tank
- Working pressure: Max 30MPa/300bar/4500psi
- Electric power: 2.2kw / 3hp
- Voltage: 220v / 50hz
- Cooling Type: Water colling / Air Cooling
- Pressure adjustment system with manual stopping function- automatic leaking after full of filling
- Using Placese: For rifle PCP airsoft paintball tanks filling
- Dimension: 450x380x380 mm / 18x15x15 inch
- Weight: 42kg / 92 lb
Package list:
water pipe
Drain valve
o-rings
Breathing mouth
Cushion
Intake valve plate
Notice:
1. The bottle filling of the air compressor must be greater than the pressure of the gas cylinder to fill the bottle! 【Air Compressor Pressure>Cylinder Pressure】
2. Suggestion for bottle filling: ≤ 3L
3. Use of gas cylinder: paintball shooting
4. Recommended operating time of the machine (machine operating load range): The temperature cannot exceed 85°C
5. Estimated filling time:
Recommendations for filling 3L gas cylinders:
1) The cylinder pressure is 200bar, and the estimated time is 12 minutes
2) The cylinder pressure is 300bar, and the estimated time is 18 minutes
powered by